[1]
Xie BCH, Cui HX, Zhang Y, Liu XL. Current research of micro electrical discharge machining of micro-hole. J Harbin Univ Sci Technol 2018; 4: 29-34.
[2]
Yang YX, Kang XM, Liang W, Zhao WSH. Prediction of electrode wear of sinking EDM. Electr Mach Tools 2017; 3: 16-20.
[3]
Wang D. Application and research of EDM technology in mould manufacturing. Des Res 2018; 2018: 53.
[4]
Zhou M, Jing HY, Wang ZD. Electrical Discharge Machining (EDM) deep and blind holes. Aviat Manuf Technol 2018; 9: 16-22.
[5]
Li X. Analysis of development direction of EDM technology research. Ind Des 2015; 8: 82-3.
[6]
Rao PM, Li HZH. The form and development trend of constant tension mechanism of WEDM with reciprocating wire feeding. Electromach Mould 2017; 3: 68-70.
[7]
Wang L, Liu Q, Zhao YM, Chen H. Based on the orthogonal experiment of 3Cr13 EDM processing test and analysis. J Shihezi Univ (Nat Sci) 2017; 3: 378-83.
[8]
Tang L, Ren L, Feng X, Zhu QL. Analysis of gap flow field in EDM process of SiC/Al composites. J Xian Univ Technol 2018; 5: 33-41.
[9]
Yong YW, Tang B. Study on influence of electrode material on interelectrode discharge voltage and machining characteristics. Mach Des Manuf 2012; 6: 103-5.
[10]
Lin Msh, Hu BK. Electrode design technology for EDM based on
IMATRON E J Zhangzhou Inst Technol 2018; 4: 79-83.
[11]
Mohanty SD, Mohanty RC. Study on performance of EDM electrodes produced through rapid tooling route. J Adv Manuf Syst 2017; 4: 357-74. [http://dx.doi.org/10.1142/S0219686717500214].
[12]
Singh NK, Pandey PM, Singh KK. Experimental investigations into the performance of EDM using argon gas-assisted perforated electrodes. Mater Manuf Process 2017; 9: 940-51. [http://dx.doi.org/10.1080/10426914.2016.1221079].
[13]
Fu JJ, Yang LG, Zhai LJ, Ren LS. A kind of fine inside groove
electrical discharge machining stacked compound electrode and
preparation method thereof of slow-wave structure. CN105108248 (2018).
[14]
Mao XJ, Wu WJ, Hao D, Li BJ. Electric spark machining electrode.
CN103752963 (2014).
[15]
Sun C, Li H, Chu YC, Zhai SM, Zhang ZJ, Zhang MQ. A
kind of intensive group's hole electric spark processing array compound
electrode and preparation method thereof. CN108372334 (2018).
[16]
Wu XY, Lu YJ, Xu B, Zhao H, Lei JG, Wu W. A kind of
rotary laminate electrode electric discharge device and method.
CN107598311 (2018).
[17]
Jiang T, Yang HQ, Fan XG, et al. Zirconium diboride-silicon
carbide-copper nickel electrode material and preparation method
thereof. CN104402451 (2015).
[18]
Wang CY. A convenient working electrode means enclosed within
the housing passage. CN205496722 (2016).
[19]
Shi HM, Li CQ, Song XQ, et al. Blade profile electric spark shaping machining
method for integral closed blade ring and clamp thereof as well as
electrode. CN108994402 (2018).
[20]
Noboru U, Norihito G, Hidetaka K, Kiyohito K. Electrode material
for electrical discharge machining and method for production
thereof. EP1574591 (2010).
[21]
Masashi H. Electrolytic electrode and process of producing the same.
EP1477585 (2015).
[22]
Wolfgang B, Wolfgang L, Christof W. Electrodes for machining a
workpiece method of manufacturing and use of such electrodes.
EP2828025 (2017).
[23]
Mervyn R, James L. Customized and varying cross-section electrodes.
US9630268 (2017).
[24]
Yu B, Zhu HN, Wang DX. Electrode of electric spark cellular
grinder used for shaping. CN201889565 (2011).
[25]
Song X, Yue P, Hu XC, Lian M, Ma WD. EDM (Electrical
Discharge Machining) electrode of irregular thin and deep hole CN202411589 (2012).
[26]
Tao C, Peng F. Tool electrode subassembly for spark-erosion machining.
CN204867691 (2015).
[27]
Chen JL, Zhong XH, Zhang K, et al. Compound electrode machining method for improving
efficiency of electric spark machining of turbine disc with
blade tip shroud. CN103990875 (2017).
[28]
Gao J. Single electrode spark plug. CN206041202 (2017).
[29]
Oliksandr B. A kind of sparking-plug electrode. CN107845952 (2018).
[30]
Huang F, Lu XZ, Liu J, Hu Q. A kind of three-dimensional
grapheme combination electrode material and its preparation method
and application. CN107093528 (2019).
[31]
He CH, Liu XY, Yang CB. Influence of micro electrical discharge machining using high electric resistance electrodes. Sci Technol Eng 2018; 2: 237-41.
[32]
Liu Y, Wang PY, Zhang WC, Su C, Ma FJ, Zhang SF. Experiment research on tool wear and shape change in small hole electrical discharge machining. J Dalian Jiaotong Univ 2017; 3: 46-50.
[33]
Singh J, Sharma RK. Green EDM strategies to minimize environmental impact and improve process efficiency. J Manuf Sci Prod 2016; 4: 273-90.
[34]
Sun C, Li H, Zhang MQ, Zhang HL, Zhai SM. Study on EDM technology for special-shaped multi-holes on titanium-alloy curved surface. Electromach Mould 2018; 2: 14-6.
[35]
Liu Y, Wang PY, Ma FJ, Chang H, Qu YS, Zhang SF. Study on EDM die sinking method of micro complex surface based on multi-material electrode. Electromach Mould 2019; 2: 13-6.
[36]
Wan FR, Wu Q, Xu LJ, Ni MM, Ye XJ. Study on sinking electro-discharge machining processing of holes on the titanium alloy grille board. Electromach Mould 2018; 1: 11-6.
[37]
Ouyang BY. Experimental study on surface roughness of the EDM by using the different electrode materials. Mech Des Manuf 2017; 11: 152-4.
[38]
Li XP, Wang YG, Wu MH, Zhao FL. Study on the loss mechanism of micro-EDM electrode made of functionally graded materials Mech Des Manuf 2018; 5: 64-7.
[39]
Yu JW, Shen X, Duan W, Shang ZT, Hu QF. Study on influence of electrode materials on surface integrity in EDM process of 8418 steel. Mech Sci Technol Aerosp Eng 2018; 1: 76-80.
[40]
Rahul, Mishra DK, Datta S, Manoj M. Effects of tool electrode on EDM performance of Ti-6Al-4V. Silicon 2018; 10: 2263-77.
[41]
Luan ChQ, Wang WQ, Kuang LX. Microstructures and properties of niobium coating on H13 steel substrate by electrospark deposition. Surf Technol 2019; 1: 298-303.
[42]
Liu JY, Fu JJ, Li Y, Ren LS, Yang LG. Split electrodes split
method and EDM electrode used. CN103909315 (2017).
[43]
Du YH. Electric spark electrode, spark machine and shell injection
molding die machining method. CN107971593 (2018).
[44]
Qiang JY. Electrode, clamping system for electrode machining and
electrode machining method. CN108637410 (2018).
[45]
Wu YX, Xia YM, Ma SL, Chen J. A kind of anchor fine electric
spark metal electrode structure and its manufacturing method CN109128405 (2019).
[46]
Bao XZ. An electrode for machining special shapes CN205764295 (2016).
[47]
Bao XZ. An electrode with improved electrode shape.
CN206105075 (2017).
[48]
Uno M, Nishiki Y, Furuta T, et al. Conductive diamond electrode and process for producing
the same. EP1640479 (2016).
[49]
Luo YF, Usmani N, Luo YF. Tool electrode for and methods of
electrical discharge machining. US20190143431 (2019).
[50]
Zhang QH, Zhang M. Lossless an electrode for electro-discharge
machining. CN103878456 (2015).
[51]
Yang YL, Li X, Cui Z. An electrode and a processing method for
producing the electrode. CN106799527 (2018).
[52]
Yu DG. A kind of electric discharging machining electrode with
wedge shape. CN109382556 (2019).
[53]
Yu DG. A kind of electric discharging machining electrode with
helicla flute. CN109382557 (2019).
[54]
Di SC, Guo CB. Novel electrical discharge machining electrode.
CN204295081 (2015).
[55]
Di SC, Li DL, Guo CB. Spark-erosion machining disconnecttype
electrode. CN204639369 (2015).
[56]
Liang F, Xiao J. Electrode for electrical discharge machining oftype hole. CN202356753 (2012).
[57]
Li FH, Dai MJ, Liu M, et al. Electric spark
electrode. CN208051076 (2018).
[58]
Lee SY, Kim JM, Kim JA. Three-dimensional porous-structured
electrode and electrochemical device having the electrode.
KR101728828 (2017).
[59]
Wang SK, Guo HB, Feng YC, Li LL. Array substrate including
pixel electrode and drain electrode in direct contact to each other,
and method of manufacturing the same, display panel, and display
device. US10254609 (2019).
[60]
Wei W, Xu ZQ, Wei KX, Du QB, Hu J. Preparation method
for nano-structure copper alloy for electrical-discharge machining
electrode. CN108359834 (2018).
[61]
Huang RN, Han SL, Liu XF, Zhao CL, Lu DD, Lou YJ. A
soft electrode discharge machining apparatus. CN105618873 (2017).
[62]
Huang RN, Liu XF, Han SL, Zhao CL, Lu DD, Lou YJ. Soft species EDM electrode means and the liquid metal based porous
ceramic. CN105562851 (2018).
[63]
Huang RN, Huang WG, Zhu EL. Electric field shape controlled
liquid-phase metal electrode electrical discharge machining system
and method. CN108907375 (2018).
[64]
Wang RJ, Xu L, Lu YF, Zhang TJ. Method for strengthening
surface of titanium alloy. CN103031509 (2013).
[65]
Yuan QF, Chen XL, Chen Y, Xu HZ. Wear-resisting-the hightemperature
coating and its implementation that titanium alloy surface
is formed. CN105543842 (2019).
[66]
Lars M, Jochen B, Juergen O, Simone B. Spark plug electrode
produced from improved electrode material. EP2514052 (2018).
[67]
Masayuki S. Spark plug. JP2018098084 (2018).
[68]
Nobuhisa S, Hiroshi S, Kazushi Y. Low-consumable electrode for
electrical discharge machining. JP2018103349 (2018).
[69]
Zhang SF, Liu Y, Zhang WC, et al. Multi-material electric spark processing
electrode and processing method thereof. CN106270839 (2017).
[70]
Liu Y, Zhang SF, Zhang WC, et al. Multi-material electric spark processing
electrode. CN205996340 (2017).
[71]
Han WB, Zhang JH. Boron carbide-zirconium boride- coppernickel
electrode material and preparation method. CN104043882 (2016).
[72]
Shi WW, Li TH, Liu HP. Method for preparing foam carbon
composite material. CN105197912 (2015).
[73]
Lei H. A kind of preparation method of thin-walled Carbon foamcarbon
nanotube compound material. CN106976861 (2019).
[74]
Li L, Dai CS, Zhu CW, Li ZY. Composite tool electrode and a
preparation method by electrode position EDM. CN103878455 (2015).
[75]
Li L, Wang D, Tian Z. Method for manufacturing gradient composite
electrode for electrical spark rough machining and electrical spark finish machining for laser solid forming. CN104972186 (2015).
[76]
Tomoyuki U, Katsushi E. Manufacturing method of electrode and
wet granules. US9917306 (2018).
[77]
Ouyang J, Zhao XJ, He X. Composite tool electrode obtained
through hot-pressing sintering of electric spark machine and preparation
method. CN108950145 (2018).
[78]
Liu HC. Cross axle forging mould die cavity electrode for electrodischarge
machining. CN205437397 (2016).
[79]
Zhou QY. An electrode connection structure and electric discharge
machine for mould processing. CN207205477 (2018).
[80]
Oleg LD, Dmitry R. EDM electrode for electrochemical finishing
of 3d-complex structures. RU2552204 (2015).
[81]
Oleg LD, Dmitry R. EDM electrode for electrochemical finishing
of 3d-complex surfaces. RU2561556 (2015).
[82]
Huo MY, Zhao YZ, Wang JC. Vibration auxiliary device of
many minute apertures of many tool electrode synchronous revolution
Electro-Discharge Machining (EDM). CN207043492 (2018).
[83]
Xu LL, Liang R, Wang YL, Hu JT. A kind of spark-erosion
machine tool tool-electrode conversion equipment. CN208427805 (2019).
[84]
Tsuneto F, Setsuro O, Masaharu U. Conductive diamond electrode
structure and method for electrolytic synthesis of fluorine-containing
material. EP2006417 (2016).
[85]
Cong PT, Huang T, Zhai RJ, Luo WX. Electrode structure for
gas spark switch and design method. CN108598868 (2018).
[86]
Jin XF, Huang DM, Han LZ. Electrode and ball socket groove
machining method with self-aligning function. CN108080752 (2018).
[87]
Li GF, Duo RP, Yu HJ, Wang J, Jin YQ, Sang FT. Planar
array sliding spark pre-ionization combined discharge electrode.
CN10254500 (2013).
[88]
Zhu NW, Liang Z, You LB, Fang XD. Dielectric barrier spark
pre-ionization discharge electrode. CN108923230 (2018).
[89]
Yu Z, Zhang P, Chen W, et al. A kind of abnormity hole electric spark integration machined electrode
and processing method. CN109434229 (2019).
[90]
Fujiki K. Discharge processing electrode and metal mold manufacturing
method. JP2018149650 (2018).
[91]
Wu XY, Lei JG, Wu W, Wu B, Lu YJ, Xu B. Very low
power electrical discharge machining tool-electrode and preparation
method thereof. CN107008981 (2019).
[92]
Ma YH, Fan ZR, Yang HR, Liu LY. An electrode and production
method thereof and a method for the machining of complexshaped
groove. CN106513880 (2018).
[93]
Zhong L, Yin QF, Qian ZQ, Shi W, Lei TC, Liu X. A kind
of superfine tapered electrode electric spark is counter to copy device.
CN109108406 (2019).
[94]
Liu JW, Liu L, Guo ZN, Peng LQ. A self-repairing strip electrode
spark milling apparatus and method. CN106808036 (2018).
[95]
Liu L, Liu JW, Guo ZN, Peng LQ. Self-repairing strip like
electrode electric spark milling unit. CN206869249 (2018).
