Login Register Cart 0
Generic placeholder image

Current Analytical Chemistry

Editor-in-Chief

ISSN (Print): 1573-4110
ISSN (Online): 1875-6727

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Characterization of a High-performance PCF-SPR Sensor for Biomedical Applications

Author(s): Himansu Shekhar Pradhan*

Volume 19, Issue 8, 2023

Published on: 27 October, 2023

Page: [585 - 594] Pages: 10

DOI: 10.2174/1573411019666230616101033

Price: $65

Abstract

Background: Surface plasmon resonance (SPR) based fibre optic sensors are becoming increasingly popular in biomedical applications. However, the sensor performance is degraded because of low sensitivity with inadequate detection accuracy and figure of merit.

Objectives: The first objective of this study is to design a D-shaped photonic crystal fibre (PCF) using COMSOL multiphysics. The second objective is to enhance the performance of the designed sensor in terms of sensitivity and detection accuracy using single and dual metal layer structures. In addition, the performance of the proposed sensor is compared with the existing one.

Methods: In this study, the performance of the PCF-SPR sensor is improved using a D-shaped photonic crystal fibre (PCF) and two metals as grating layers. The work in this paper is divided into two parts. In the first part, the gold metal layer with optimized thickness is used to achieve good sensitivity. In the second part, the combination of gold and silver dual metal layers with optimized thickness is used to achieve good detection accuracy. Moreover, the performance of the proposed sensor is compared to other published D-shaped PCF sensors.

Results: The proposed D-shaped PCF-SPR sensor is designed and simulated using COMSOL multiphysics. The results in terms of sensitivity (S) and detection accuracy (DA) are obtained using a single metal layer and dual metal layers with optimum thickness. Moreover, the transmission coefficient and loss curve have been calculated using different refractive indices of the material. In addition, the simulation results are validated for cancer detection using the proposed sensor.

Conclusion: An improvement of the D-shaped PCF sensor for cancer detection is presented in terms of S and DA using single or dual metal layer structures and COMSOL multiphysics. In a single metal layer structure, only gold is used as a grating layer, and the thickness of the grating layer is optimized for achieving high sensitivity. Similarly, a combination of gold and silver is used as the grating layer in the dual metal layer structure for achieving a high DA. Moreover, the obtained results of the proposed PCFSPR sensor are compared with the published results and found that the proposed sensor can be used with a high degree of S and DA for biomedical applications and also can be used in the bio-sensing field.

Keywords: Photonic crystal fibre, COMSOL multiphysics, refractive index, sensitivity, detection accuracy, SPR biosensor.

« Previous Next »
Graphical Abstract

[1]
Pal, S.; Verma, A.; Raikwar, S.; Prajapati, Y.K.; Saini, J.P. Detection of DNA hybridization using graphene-coated black phosphorus surface plasmon resonance sensor. Appl. Phys., A Mater. Sci. Process., 2018, 124(5), 394.
[http://dx.doi.org/10.1007/s00339-018-1804-1]
[2]
Srivastava, T.; Jha, R. Black phosphorus: a new platform for gaseous sensing based on surface plasmon resonance. IEEE Photonics Technol. Lett., 2018, 30(4), 319-322.
[http://dx.doi.org/10.1109/LPT.2017.2787057]
[3]
Mudgal, N.; Yupapin, P.; Ali, J.; Singh, G. BaTiO3-graphene-affinity layer–based surface plasmon resonance (SPR) biosensor for pseudomonas bacterial detection. Plasmonics, 2020, 15(5), 1221-1229.
[http://dx.doi.org/10.1007/s11468-020-01146-2]
[4]
Lin, Z.; Chen, S.; Lin, C. Sensitivity improvement of a surface plasmon resonance sensor based on two-dimensional materials hybrid structure in visible region: a theoretical study. Sensors (Basel), 2020, 20(9), 2445.
[http://dx.doi.org/10.3390/s20092445] [PMID: 32344827]
[5]
Rahman, M.M.; Rana, M.M.; Rahman, M.S.; Anower, M.S.; Mollah, M.A.; Paul, A.K. Sensitivity enhancement of SPR biosensors employing heterostructure of PtSe2 and 2D materials. Opt. Mater., 2020, 107, 110123.
[http://dx.doi.org/10.1016/j.optmat.2020.110123]
[6]
Prabowo, B.; Purwidyantri, A.; Liu, K.C. Surface plasmon resonance optical sensor: A review on light source technology. Biosensors (Basel), 2018, 8(3), 80.
[http://dx.doi.org/10.3390/bios8030080] [PMID: 30149679]
[7]
Maharana, P.K.; Jha, R.; Palei, S. Sensitivity enhancement by air mediated graphene multilayer based surface plasmon resonance biosensor for near infrared. Sens. Actuators B Chem., 2014, 190, 494-501.
[http://dx.doi.org/10.1016/j.snb.2013.08.089]
[8]
Jorgenson, R.C.; Yee, S.S. A fiber-optic chemical sensor based on surface plasmon resonance. Sens. Actuators B Chem., 1993, 12(3), 213-220.
[http://dx.doi.org/10.1016/0925-4005(93)80021-3]
[9]
Díez, A.; Andrés, M.V.; Cruz, J.L. In-line fiber-optic sensors based on the excitation of surface plasma modes in metal-coated tapered fibers. Sens. Actuators B Chem., 2001, 73(2-3), 95-99.
[http://dx.doi.org/10.1016/S0925-4005(00)00649-3]
[10]
Sharma, A.K.; Marques, C. Design and performance perspectives on fibre optic sensors with plasmonic nanostructures and gratings: A review. IEEE Sens. J., 2019, 19(17), 7168-7178.
[http://dx.doi.org/10.1109/JSEN.2019.2915274]
[11]
Ding, Z.W.; Lang, T.T.; Wang, Y.; Zhao, C-L. Surface plasmon resonance refractive index sensor based on tapered coreless optical fiber structure. J. Lightwave Technol., 2017, 35(21), 4734-4739.
[http://dx.doi.org/10.1109/JLT.2017.2755668]
[12]
Rezaei, N.; Yahaghi, A. A high sensitivity surface plasmon resonance D-shaped fibre sensor based on a waveguide-coupled bimetallic structure: Modeling and optimization. IEEE Sens. J., 2014, 14(10), 3611-3615.
[http://dx.doi.org/10.1109/JSEN.2014.2329896]
[13]
Jabin, M.A.; Luo, Y.; Peng, G.D.; Rana, M.J.; Ahmed, K.; Nguyen, T.K.; Paul, B.K.; Dhasarathan, V. Design and fabrication of amoeba faced photonic crystal fiber for biosensing application. Sens. Actuators A Phys., 2020, 313, 112204.
[http://dx.doi.org/10.1016/j.sna.2020.112204]
[14]
Dash, J.N.; Jha, R. Design and fabrication of amoeba faced photonic crystal fibre for biosensing application. Opt. Quantum Electron., 2016, 48(2), 137.
[http://dx.doi.org/10.1007/s11082-016-0423-3]
[15]
Yan, H.T.; Liu, Q.; Ming, Y.; Luo, Y.C.; Lu, Q. Metallic grating on a D-Shaped fiber for refractive index sensing. IEEE Photonics J., 2013, 5(5), 4800706.
[16]
Leon, M.J.B.M.; Kabir, M.A. Design of a liquid sensing photonic crystal fiber with high sensitivity, bireferingence & low confinement loss. Sens. Biosensing Res., 2020, 28, 100335.
[http://dx.doi.org/10.1016/j.sbsr.2020.100335]
[17]
Huang, T. Highly sensitive SPR sensor based on D-shaped photonic crystal fibre coated with indium tin oxide at near-infrared wavelength. Plasmonics, 2017, 12(3), 583-588.
[http://dx.doi.org/10.1007/s11468-016-0301-7]
[18]
Abbas, A.; Linman, M.J.; Cheng, Q. Sensitivity comparison of surface plasmon resonance and plasmon-waveguide resonance biosensors. Sens. Actuators B Chem., 2011, 156(1), 169-175.
[http://dx.doi.org/10.1016/j.snb.2011.04.008] [PMID: 21666780]
[19]
Paul, B.K.; Ahmed, K.; Vigneswaran, D.; Ahmed, F.; Roy, S.; Abbott, D. Quasi-photonic crystal fiber-based spectroscopic chemical sensor in the terahertz spectrum: Design and analysis. IEEE Sens. J., 2018, 18(24), 9948-9954.
[http://dx.doi.org/10.1109/JSEN.2018.2872892]
[20]
An, G.; Li, S.; Qin, W.; Zhang, W.; Fan, Z.; Bao, Y. High-sensitivity refractive index sensor based on D-shaped photonic crystal fibre with rectangular lattice and nanoscale gold film. Plasmonics, 2014, 9(6), 1355-1360.
[http://dx.doi.org/10.1007/s11468-014-9749-5]
[21]
Zeng, L.; Chen, M.; Yan, W.; Li, Z.; Yang, F. Si-grating-assisted SPR sensor with high figure of merit based on Fabry–Pérot cavity. Opt. Commun., 2020, 457, 124641.
[http://dx.doi.org/10.1016/j.optcom.2019.124641]
[22]
Sharma, A. K.; Kaur, B.; Marques, C. Simulation study on fluoride fiber SPR sensor with multilayer arrangements of graphene under thermal variation of radiation damping in NIR., NASA ADS, 2020, 11354-113542f.
[http://dx.doi.org/10.1117/12.2555698]
[23]
Kadhim, R.A.; Yuan, L.; Xu, H.; Wu, J.; Wang, Z. Highly sensitive d-shaped optical fiber surface plasmon resonance refractive index sensor based on Ag-α-Fe2O3 grating. IEEE Sens. J., 2020, 20(17), 9816-9824.
[http://dx.doi.org/10.1109/JSEN.2020.2992854]
[24]
Sharma, A.K.; Jha, R.; Gupta, B.D. Fibre-optic sensors based on surface plasmon resonance: A comprehensive review. IEEE Sens. J., 2007, 7(8), 1118-1129.
[http://dx.doi.org/10.1109/JSEN.2007.897946]
[25]
Nayak, J.K.; Jha, R. Numerical simulation on the performance analysis of a graphene-coated optical fiber plasmonic sensor at anti-crossing. Appl. Opt., 2017, 56(12), 3510-3517.
[http://dx.doi.org/10.1364/AO.56.003510] [PMID: 28430221]
[26]
Singh, S.; Gupta, B.D. Simulation of a surface plasmon resonance-based fiber-optic sensor for gas sensing in visible range using films of nanocomposites. Meas. Sci. Technol., 2010, 21(11), 115202.
[http://dx.doi.org/10.1088/0957-0233/21/11/115202]
[27]
Qazwini, Y.A.; Arasu, P.T.; Noor, A.S.M. Numerical investigation of the performance of an SPR-based optical fibre sensor in an aqueous environment using finite-difference time domain. Proc. 2nd Int. Conf. Photon., 2011, pp. 1-4.
[28]
Salari, M.; Askari, H.R. Theoretical investigation of absorption and sensitivity of nano-plasmonic fiber optic sensors. Opt. Laser Technol., 2013, 48, 315-325.
[http://dx.doi.org/10.1016/j.optlastec.2012.08.028]
[29]
Rahman, M.S.; Noor, S.S.; Anower, M.S. Design and numerical analysis of a graphene-coated fibre-optic SPR biosensor using tungsten disulphide. Photon. Nanostruct. Fundam. Appl., 2019, 33, 29-35.
[30]
Al-Qazwini, Y.; Noor, A.S.M.; Arasu, P.T.; Sadrolhosseini, A.R. Investigation of the performance of an SPR-based optical fiber sensor using finite-difference time domain. Curr. Appl. Phys., 2013, 13(7), 1354-1358.
[http://dx.doi.org/10.1016/j.cap.2013.04.011]
[31]
Mishra, A.K.; Mishra, S.K.; Verma, R.K. Graphene and beyond graphene MoS2: A new window in surface-plasmon-resonance-based fibre optic sensing. J. Phys. Chem. C, 2016, 120(5), 2893-2900.
[http://dx.doi.org/10.1021/acs.jpcc.5b08955]
[32]
Amiri, I.S.; Alwi, S.A.K.; Raya, S.A.; Zainuddin, N.A.M.; Rohizat, N.S.; Rajan, M.S.M.; Zakaria, R. Graphene oxide effect on improvement of silver surface plasmon resonance D-shaped optical fibre sensor. J. Optical Commun., 2023, 44(1), 53-60.
[http://dx.doi.org/10.1515/joc-2019-0094]
[33]
Ying, Y.; Wang, J.; Hu, N. Determination of refractive index using surface plasmon resonance (SPR) and rigorous coupled wave analysis (RCWA) with a D-shaped optical fiber and a nano-gold grating. Instrum. Sci. Technol., 2020, 48(4), 376-385.
[http://dx.doi.org/10.1080/10739149.2020.1728694]
[34]
Tsai, C.; Huang, S. Water Distribution in Cancer and Normal Cells; , 2012. Available from: laser.ee.ntu.edu.tw
[35]
Yaroslavsky, A.N.; Patel, R.; Salomatina, E.; Li, C.; Lin, C.; Al-Arashi, M..; Neel, V. High-contrast mapping of basal cell carcinomas. Opt. Lett., 2012, 37(4), 644-646.
[http://dx.doi.org/10.1364/OL.37.000644] [PMID: 22344134]
[36]
Sharan, P.; Bharadwaj, S.M.; Dackson Gudagunti, F.; Deshmukh, P. Design and modelling of photonic sensor for cancer cell detection; IEEE Xplore, 2014.
[http://dx.doi.org/10.1109/IMPETUS.2014.6775872]
[37]
Kumar, A.; Verma, P.; Jindal, P. Decagonal solid core PCF based refractive index sensor for blood cells detection in terahertz regime. Opt. Quantum Electron., 2021, 53(4), 165.
[http://dx.doi.org/10.1007/s11082-021-02818-x]
[38]
Chaudhary, V.S.; Kumar, D.; Mishra, G.P.; Sharma, S.; Kumar, S. Plasmonic biosensor with gold and titanium dioxide immobilized on photonic crystal fiber for blood composition. IEEE Sens. J., 2022, 22(9), 8474-8481.
[http://dx.doi.org/10.1109/JSEN.2022.3160482]

Rights & Permissions Print Cite
Article Metrics
29
3
Wayfinder Image
© 2024 Bentham Science Publishers | Privacy Policy