Contents

Current Nanoscience, Volume 10 - Number 1

Graphical Abstract

Graphical Abstracts:

, 10(1): i - xiii


DOI: 10.2174/157341371001140211174258




Preface

Preface:

, 10(1): 1

Atta-ur-Rahman


DOI: 10.2174/157341371001140211174351




Editorial

Editorial: Proceeding of the 12th International Symposium on Novel and Nano Materials (ISNNM-2012)

, 10(1): 2

Jung-Ho AHN


DOI: 10.2174/1573413710999140123113926




Effect of Micro Ti and TiO2 P-25 Nano Powder Addition on Mechanical Properties of TiO2 Nanopowders

, 10(1): 3 - 6

Hyo Young Park, Rumman Md Raihanuzzaman, Han-Jin Ko, Joon-Min Park, Young-Choon Kim and Soon-Jik Hong


DOI: 10.2174/1573413709666131111221403




Preparation and Characterization of Copper Nanoparticles via the Liquid Phase Plasma Method

, 10(1): 7 - 10

Heon Lee, Sung Hoon Park, Seong-Gyu Seo, Sun-Jae Kim, Sang-Chai Kim, Young-Kwon Park and Sang-Chul Jung


DOI: 10.2174/1573413709666131111221741




Separation of Heavy Rare Earth Elements with Extraction Chromatography

, 10(1): 11 - 15

Jeong-Gon Kim


DOI: 10.2174/1573413709666131111222019




Low Current Resistive Switching Behavior in Semiconductor/Ferroelectric Coupling

, 10(1): 16 - 19

Hongsu Park, YoungWoong Moon and DuckKyun Choi


DOI: 10.2174/1573413709666131111222335




Cu based Sputtering Target Materials for Solar Cell Manufactured by Cold Spray Deposition

, 10(1): 20 - 22

Kee-Ahn Lee, Myung-Ju Lee, Dong-Yong Park and Hyung-Jun Kim


DOI: 10.2174/1573413709666131111222946




Comparative Study between Impact Behaviors of Composites with Aluminum Foam and Honeycomb

, 10(1): 23 - 27

Y.C. Kim and J.U. Cho


DOI: 10.2174/1573413709999131205152839




Effect of Dysprosium-Compounds Treatment on Coercivity of Nd-Fe-B Sintered Magnets

, 10(1): 28 - 31

Dhani Ram Dhakal, Seok Namkung, Min-Woo Lee and Tae-Suk Jang


DOI: 10.2174/1573413709666131111224235




Microwave Technique: A Powerful Tool for Sintering Ceramic Materials

, 10(1): 32 - 35

A. Borrell, M. D. Salvador, M. Miranda, F. L. Penaranda-Foix and J. M. Catala-Civera


DOI: 10.2174/1573413709666131111225053




Interface Reactions of Pure Ti Thermal Plasma Spray Coated Mo-Si-B Alloys During Oxidation

, 10(1): 36 - 39

Y.H. Song, J.M. Kim and J.S. Park


DOI: 10.2174/1573413709666131111225312




Microstructures and Mechanical Properties of CNT/AZ31 Composites Produced by Mechanical Alloying

, 10(1): 40 - 46

Daehwan Kim, Bonghak Seong, Guenho Van, Inshup Ahn and Sugun Lim


DOI: 10.2174/1573413709666131111225525




Effects of Partial Phase Transformation on Characteristics of 9Cr Nanostructured Ferritic Alloy

, 10(1): 47 - 50

Ji-Hyun Yoon, Yongbok Lee, Suk-Hoon Kang, Thak S. Byun and David T. Hoelzer


DOI: 10.2174/1573413709666131111225832




Characteristic Analysis of Carburized Quenching Processes for Bevel Gear of Automobile Driving Part

, 10(1): 51 - 55

Key-Sun Kim


DOI: 10.2174/1573413709666131111230030




Characteristics of Machined Surface Layer of Cemented Carbide by Wire Electrical Discharge Machine

, 10(1): 56 - 61

Woo-Gun Sim, Joon-Woo Song, Song-Jik Hong and Key-Sun Kim


DOI: 10.2174/1573413709666131111231413




Mechanical Properties of WC-Co Alloys with Various Mixing and Milling Conditions using High Energy Ball Miller

, 10(1): 62 - 65

Joon-Woo Song, Rumman Md. Raihanuzzaman and Soon-Jik Hong


DOI: 10.2174/1573413709666131111232140




Characterization and Cell Performance of Al Paste with an Inorganic Binder of Bi2O3–B2O3–ZnO System in Si Solar Cells

, 10(1): 66 - 69

Bit-Na Kim, Do-Hyung Kim, Hyeong-Jun Kim, Heon Lee, Hyo Sik Chang and Sung-Soo Ryu


DOI: 10.2174/1573413709666131111233041




Effect of Carbon Addition on the Property of Mechanically Alloyed Ni-Y2O3

, 10(1): 70 - 73

Jung-Ho Ahn, Jinsung Jang and Tae Kyu Kim


DOI: 10.2174/1573413709666131111233542




In-situ Monitoring of Micro-scale PWSCC of Ni-based Alloys in a Simulated Primary Water Chemistry of a PWR using an EN-DCPD Technique

, 10(1): 74 - 77

Sung-Woo Kim, Yeon-Ju Lee and Seong-Sik Hwang


DOI: 10.2174/1573413709666131111233845




Methanol Synthesis from Syngas Produced via Gasification of Municipal Solid Waste

, 10(1): 78 - 80

Jong-Ki Jeon, Gwan Hyung Lee, Jong-Wan Lim, Sung Hoon Park, Jae Hoi Gu, Sang Chai Kim, Jong-In Dong and Young-Kwon Park


DOI: 10.2174/1573413709666131111234400




Relation between Surface Oxide and SCC of Alloy 600

, 10(1): 81 - 85

Dong-Jin Kim, Hong Pyo Kim and Seong Sik Hwang


DOI: 10.2174/1573413709666131111235817




A Novel Method for Fabricating Fe-Cr-Al Open-cell Metallic and Alloyed Foams

, 10(1): 86 - 88

Luong-Huu Bac, Byoung-Kee Kim and Young-Min Kong


DOI: 10.2174/1573413709666131112001004




Corrosion Behavior on Ni-base Alloys Applied with Nano-TiO2 in High Temperature Caustic Water

, 10(1): 89 - 93

Kyung-Mo Kim, Eun-Hee Lee and Do-Haeng Hur


DOI: 10.2174/1573413709666131108230252




Effects of Oxygen Concentration on the Size Distribution of Oxide Particles in ODS Steel

, 10(1): 94 - 96

Tae Kyu Kim, Chang Hee Han, Suk Hoon Kang, Sanghoon Noh and Jinsung Jang


DOI: 10.2174/1573413709666131108230647




Oxidation of Ti3Al0.3Si0.7C2 Compounds at 900-1200oC in Air

, 10(1): 97 - 100

Jae Chun Lee, Sang Whan Park and Dong Bok Lee


DOI: 10.2174/1573413709666131108231720




Formation of Hollow Copper Oxide by Oxidation of Cu Nanoparticles

, 10(1): 101 - 103

J.-G. Lee, R. Nakamura, Y.-S. Choi, J.-H. Yu and C.-J. Choi


DOI: 10.2174/1573413709666131108232654




Electrolytic Recovery of Tin from Printed Circuit Boards (PCBs) Disassembled from Waste Liquid Crystal Displays (LCDs): Selection of H2SiF6 + H2SO4 + H2O2 Leaching Solution over Two-stage Leaching in HNO3 and HCl

, 10(1): 104 - 107

Sungkyu Lee, Kyoung-Hoon Kang, Jae Layng Park, Myung-hwan Hong, Soo-Young Lee, Sung-Su Cho and Hyun Seon Hong


DOI: 10.2174/1573413709666131108233753




Effects of Aluminum and Strontium Content on the Microstructures and Mechanical Properties of Mg-Al-Ca-Sr Alloys

, 10(1): 108 - 113

Byoung-Gi Moon, Bong-Sun You and Yu-Dong Hahn


DOI: 10.2174/1573413709666131108234307




Development for Fabrication of Refined Silicon Nanoparticles by Transferred Arc Plasma System

, 10(1): 114 - 117

Byungkwon Kim, Jungho Hwang, Jeong Yeol Kim and Dongho Park


DOI: 10.2174/1573413709666131109001023




Microstructure and Thermoelectric Properties of N-type 95%Bi2Te3-5%Bi2Se3 Compound Prepared by High Energy Milling and Hot Extrusion

, 10(1): 118 - 122

Hyo-Seob Kim and Soon-Jik Hong


DOI: 10.2174/1573413709666131109001250




Study of the Evolution of Defects in the Structure of Reactor Pressure Vessel by Rate Theory

, 10(1): 123 - 127

Gyeong-Geun Lee, Yong-Bok Lee, Min-Chul Kim and Junhyun Kwon


DOI: 10.2174/1573413709666131109001431




Effect of Scrap Size on Extraction of Neodymium from Nd-Fe-B Magnet Scrap by Liquid Metal Extraction

, 10(1): 128 - 130

Hyun Woong Na, Yong Hwan Kim, Hyeon Taek Son, In Ho Jung, Han Shin Choi and Tae Bum Kim


DOI: 10.2174/1573413709666131109002236




Characteristics of Niobium Powder Used Capacitors Produced by Metallothermic Reduction in Molten Salt

, 10(1): 131 - 134

Jae-sik Yoon, Gae-hang Lee, Soon-jik Hong, Hyun-seon Hong, Chan-gi Lee and Ji-myon Lee


DOI: 10.2174/1573413709666131109003032




CFD Simulation of Chemical Vapor Deposition of Silicon Carbide in CH3SiCl3-H2 System

, 10(1): 135 - 137

Kyoon Choi and Jun-Woo Kim


DOI: 10.2174/1573413709666131109003414




A Study on the Efficient Recovery and Separation of the Phosphor from CCFLs in End-of-Life LCD Units

, 10(1): 138 - 142

Hyun Seon Hong, Hang Chul Jung, Minhye Seo, Sunghyun Uhm, Jae Sik Yoon and Han Gil Suk


DOI: 10.2174/1573413709666131109003902




Recycling of Silicon Sludge and its Optical Properties

, 10(1): 143 - 145

Bum-Sung Kim and Woo-Byoung Kim


DOI: 10.2174/1573413709666131109004146




The Effect of Sc on the Microstructure and Mechanical Properties of Hypereutectic Al-Si Alloy Fabricated by a Gas Atomization Process

, 10(1): 146 - 150

Tae-Haeng Lee, Han-Jin Ko, Tae-Sik Jeong and Soon-Jik Hong


DOI: 10.2174/1573413709666131109004559




Evaluation of Microstructure and Mechanical Properties in a Thick Plate of G91 Steel and its Weld for High Temperature Nuclear System

, 10(1): 151 - 153

Min-Chul Kim, Sang-Gyu Park, Ki-Hyoung Lee, Sung Ho Kim and Bong-Sang Lee


DOI: 10.2174/1573413709666131109004732




Mechanical Properties of Al2TiO5 Ceramics for High Temperature Application

, 10(1): 154 - 158

Dami Kim, Hyeong-Jun Kim, Hyung-Tae Kim, Jung Namkung, Ikjin Kim, Sung-Churl Choi and Sung- Soo Ryu


DOI: 10.2174/1573413709666131109005012




Optical Properties and Thermal Stability of Ultrathin TaNx-Ag-Si Films for Low Emissivity Applications

, 10(1): 159 - 163

Sivasankar Reddy Akepati, Chadrasekhar Loka, Ho Tak Yu and Kee-Sun Lee


DOI: 10.2174/1573413709666131109005216




Microstructures and Electrochemical Properties of Si-Ni-Ti Alloys Mixed with Various Forms of Carbon

, 10(1): 164 - 167

Dae Yeong Jeong, Won-Wook Park and Keun Yong Sohn


DOI: 10.2174/1573413709666131109005441




Preparation and Characterizations of Lithium Iron Borate Nano-sized Powders via Aerosol and Thermal Process

, 10(1): 168 - 170

Kun-Jae Lee, Dong-Wan Kim and Hyun Seon Hong


DOI: 10.2174/1573413709666131109005654




Webmaster Contact: info@benthamscience.org
Copyright © 2018 Bentham Science