Current Mechanics and Advanced Materials
Volume 2, 3 Issues, 2022
ISSN: 2666-1853 (Online)
ISSN: 2666-1845 (Print)
This journal supports open access
ISSN: 2666-1853 (Online)
ISSN: 2666-1845 (Print)
This journal supports open access
Aims & Scope
Current Mechanics and Advanced Materials is an international journal devoted to publishing peer-reviewed, high quality, original papers in the field of Materials science. The following article types are published: original research articles, reviews, thematic issues, editorials, letters, and conference reports.
The journal welcomes, but not limited to, the papers from the following topics:
- Composite materials
- Ceramics
- New properties of materials
- Polymer
- Biomechanics and biomaterials
- Constitutive modelling
- Computational engineering
- Advanced fibre composites
- Smart materials and structures
- Fracture and damage mechanics
- Failure analysis and residual strength
- Viscoelasticity
- Microstructure and characterisation of materials
- Solidification of materials
- Interfaces of composite materials
- Amorphous material
- Structure-property relationship in engineering material
- Nanomaterials and nanomechanics
- Aerodynamics
- Micromechanics
- Multiscale simulation
- Biological materials
- Metamaterials
- Soft matter
- Structural engineering
- Building materials
- Aerospace structures
Current Mechanics and Advanced Materials
,Volume 1
-Number 2
Biography
Review Article
Mechanism of Inhibition of Hydroxyapatite Nanoparticles on Cancer Cells and Recent Advances in the Field
, 1(2): e271021194957Mohammad Rasouli and Seyed Morteza Naghib*
DOI: 10.2174/2666184501666210726120700
Research Article
A Non-iterative Inverse Method for the Identification of Time and Space-Dependent Heat Sources of Multi-dimensional GMs by Boundary Temperature Data
, 1(2): e271021196194Chuang Xu and Chunying Dong*
DOI: 10.2174/2666184501666210906151321
Research Article
Nanoscale Reciprocating Sliding Contact Behaviors of an Isosceles Trapezoid Textured Surface in Space Environment
, 1(2): e140621188733Ruiting Tong*, Zefen Quan and Geng Liu
DOI: 10.2174/2666184501999201204152001
Research Article
Optimization of Die Design to Abolish Surface Defect on Telescopic Front Fork (TFF) Tube
, 1(2): e271021194853Asit Kumar Choudhary* and Braj Bihari Prasad
DOI: 10.2174/2666184501666210716155049
Research Article
Neural Network with Particle Swarm Optimisation for Analysing Band Structure of Elastic Metamaterials
, 1(2): e271021196269Weiqi Chen, Cheuk Yu Lee, Xiuping Jia and Qing-Hua Qin*
DOI: 10.2174/2666184501666210908120227
Acknowledgement
Articles Ahead of Print
Adiabatic Shear Failure of Ultrafine Grained Titanium Under Impact Loading: An in-situ Experimental Study
Qichao Ruan, Yazhou Guo*, Qiuming Wei and Yulong Li
DOI: 10.2174/2666184502666220307122558
View Abstract
Elastic Guided Waves in Bistable Composite Structures - Experimental and Numerical Investigation
D.M. Saad, S. Mustapha*, A. Firouzian and A. Abdul Aziz
DOI: 10.2174/2666184501666210906115257
View Abstract
Abstracts Ahead of Print
Published Contents
Editor's Choice
Open Access Articles
Most Cited Articles
Most Accessed Articles
Free Vibration of Functionally Graded Carbon Nanotube-reinforced Doubly-curved Shells
, 2021; 1(1): 39-49.Maziar Janghorban* and Behrouz Karami
DOI: 10.2174/2666184501999201005211608
Baking-free Bricks Prepared from the Muck and Slag Cement
, 2021; 1(1): 17-23.Zi Wang*, Lianjin Yang, Hongjun Chen and Lizhai Pei*
DOI: 10.2174/2666184501666200305112714
Nanoscale Reciprocating Sliding Contact Behaviors of an Isosceles Trapezoid Textured Surface in Space Environment
, 2021; 1(2): 1-10.Ruiting Tong*, Zefen Quan and Geng Liu
DOI: 10.2174/2666184501999201204152001
Multifunctional Hydroxyapatite-based Nanoparticles for Biomedicine: Recent Progress in Drug Delivery and Local Controlled Release
, 2021; 1(1): 3-16.Mohammad Rasouli, Seyedeh F. Darghiasi, Seyed M. Naghib* and Mehdi Rahmanian*
DOI: 10.2174/2666184501999200420072949
Li1.2Mn0.6Ni0.2O2 Cathode Material Prepared by the Ultrasonic Dispersionassisted Method
, 2021; 1(1): 58-65.Tingting Fang, Hailiang Chu, Junqiang Hua, Ying Zhu, Shujun Qiu*, Shengzhou Bu, Liangbin Zhang, Mingzhong Yuan, Yongjin Zou, Cuili Xiang, Huanzhi Zhang , Erhu Yan, Fen Xu and Lixian Sun*
DOI: 10.2174/2666184501666200331125614
Hot Deformation Behavior and Processing Map of a Novel Dilute Extruded Mg-Zn-Gd-Y-Nd Alloy
, 2021; 1(1): 74-82.Zahra Abbasi and Ramin Ebrahimi*
DOI: 10.2174/2666184501999200513114706
A Multiscale Model to Study the Mechanical Properties of the Graphene, Boron Nitride and Silicon Carbide Hexagonal Nanosheets
, 2021; 1(1): 66-73.Yuzhou Sun*, Yingying Hu and Xinming Li
DOI: 10.2174/2666184501999200902143807
Synthesis of Pt-MWCNT Nano Composite in Trioctylmethyl Ammonium Hydrogen Phthalate (TOMAHP) Ionic Liquid Using Ultrasonic Cavitation
, 2021; 1(1): 50-57.Sujoy Biswas*, Kinshuk Dasgupta, M.L. Sahu and Amit Srivastave
DOI: 10.2174/2666184501666191227103755
Editor-in-Chief
Qinghua Qin
College of Engineering and Computer Science
The Australian National University
Shenzhen
(China)
Biography
College of Engineering and Computer Science
The Australian National University
Shenzhen
Biography
Biography of Qinghua Qin
Qinghua Qin is a professor at the Department of Engineering, Shenzhen MSU-BIT University. He has worked in several leading Australian and Chinese institutions and was awarded a Queen Elizabeth II fellowship and professorial fellowship at the University of Sydney. Both were from The Australian Research Council. His research interests include meshless methods, hybrid finite and boundary element methods, piezoelectric materials and structures, nanomaterials, metamaterials, and composite materials. He has published 8 academic books and more than 300 journal papers in these fields.
About the Journal
For Authors
For Librarians & Readers
Webmaster Contact: info@benthamscience.net