Login Register Cart 0
Generic placeholder image

Recent Patents on Mechanical Engineering

Editor-in-Chief

ISSN (Print): 2212-7976
ISSN (Online): 1874-477X

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Design, Stress Analysis, and FEA Prediction of Nutation Drive with Face Gear

Author(s): Lili Zhu, Guangxin Wang*, Linjie Li and Jiayu Wang

Volume 16, Issue 1, 2023

Published on: 13 October, 2022

Page: [45 - 60] Pages: 16

DOI: 10.2174/2212797615666220912111136

Price: $65

Abstract

Background: Nutation face gear transmission is a patent about a new type of transmission based on meshing between two face gears. It replaces spur gear with internal face gear to form a “faceface” meshing gear pair and actualizes its deceleration function by combining the nutation principle, which has the advantages of both face gear and nutation drive.

Objective: The purpose of this paper is to study the designing and manufacturing of a nutation face gear reducer to derive the force calculation formulas of the face gear, input shaft and bearings, calculate the contact stress of tooth surface and bending stress of tooth root, determine the basic parameters of the prototype, and analyze the processing points for the core parts of the prototype.

Methods: Using the dynamic meshing force analysis method by combining it with modern digital design and manufacturing methods, the designing and manufacturing of a nutation face gear reducer are studied.

Results: In the theoretical calculation, the maximum contact stress of the fixed side tooth surface is about 433MPa, and the average contact stress is about 345MPa; the maximum contact stress of the tooth surface on the rotating side is about 579MPa, with an average of about 502MPa; the comparison of which with the finite element analysis results verifies the theoretical calculation results.

Conclusion: The dynamic meshing force analysis method of nutation face gear transmission is deduced and given. Based on this, gear tooth surface transient contact stress and tooth root bending stress are calculated.

Keywords: Face gear, Finite Element Analysis (FEA), force calculation, nutation drive, prototype, meshing force analysis method.

« Previous Next »
[1]
Kedrowski DK, Slimak SP. Nutating gear drive train for a cordless screwdriver. Mech Eng 1994; 1: 70-1.
[2]
Mlendini P, Perrone M, Stam S, Barbagelate A, Primavori MD, Appolonia S. Wobbling gears achieve high ratios. ESA 2000; 10(3): 34-7.
[3]
Uzuka K, Enomoto I, Suzumori K. Development of nutation motors (2nd report, Development of practical model by the OF type bevel gears and diaphragm). Trans Jpn Soc Mech Eng C 2006; 72(716): 1200-6. [Part C].
[http://dx.doi.org/10.1299/kikaic.72.1200]
[4]
Uzuka K, Enomoto I, Suzumori K. Development of nutation motors (1st report, driving principle and basic characteristics of pneumatic nutation motor). Trans Jpn Soc Mech Eng C 2006; 72(716): 1194-9. [Part C].
[http://dx.doi.org/10.1299/kikaic.72.1194]
[5]
Uzuka K, Enomoto I, Suzumori K. Development of nutation motors (4th report, development of small-sized and high torque pneumatic nutation motor by the OFW type bevel gears and principle of lever). Trans Jpn Soc Mech Eng C 2007; 73(730): 1731-7. [Part C].
[http://dx.doi.org/10.1299/kikaic.73.1731]
[6]
Uzuka K, Enomoto I, Suzumori K, Nagata T. Development of nutation motors (3rd report, development of electromagnetic nutation motor by the OF1 type bevel gears and electromagnets). Trans Jpn Soc Mech Eng C 2007; 73(728): 1188-95. [Part C].
[http://dx.doi.org/10.1299/kikaic.73.1188]
[7]
Oda S, Suzumori K, Uzuka K, Enomoto I. Development of nutation motors (improvement of pneumatic nutation motor by optimizing diaphragm design). J Mech Sci Technol 2010; 24(1): 25-8.
[http://dx.doi.org/10.1007/s12206-009-1157-y]
[8]
Yamamori M. Nutation gear device, transmission ratio variable mechanism and steering device for vehicle. ZL201010129312, 2010.
[9]
Mathur T, Saribay ZB, Bill RC, Smith EC. Analysis of pericyclic mechanical transmission with straight bevel gears. In: AIAA SCITECH-2015 Kissimmee, Fl. 2015.
[10]
Saribay ZB. Tooth geometry and bending stress analysis of conjugate meshing face-gear pairs. Proc Inst Mech Eng, C J Mech Eng Sci 2013; 227(6): 1302-14.
[http://dx.doi.org/10.1177/0954406212457644]
[11]
Mark JR, Eric K. Power transmissions having pericyclic motion converters. US9765853, 2015.
[12]
Barbagelata A, Ellero S, Landò R. Planetary gearbox. EP2975296, 2015.
[13]
Mark JR, Eric K. Power transmissions. US20160341282, 2016.
[14]
Johann B. Regenerative drive system. US20180244156, 2018.
[15]
Molyneux WG. The internal bevel gear and its applications. Proc Inst Mech Eng Part G J Aerosp Eng 1997; 211(1): 39-61.
[http://dx.doi.org/10.1243/0954410971532488]
[16]
Nelson CA, Cipra RJ. Similarity and equivalence of nutating mechanisms to bevel epicyclic gear trains for modeling and analysis. J Mech Des 2015; 127(2): 1305-11.
[17]
Nelson CA, Cipra RJ. Simplified kinematic analysis of bevel epicyclic gear trains with application to power-flow and efficiency analyses. J Mech Des 2005; 127(2): 278-86.
[http://dx.doi.org/10.1115/1.1814392]
[18]
Litvin FL, Wang AG, Handschuh RF. Computerized generation and simulation of meshing and contact of spiral bevel gears with improved geometry. Comput Methods Appl Mech Eng 1998; 158(1-2): 35-64.
[http://dx.doi.org/10.1016/S0045-7825(97)00229-6]
[19]
Litvin FL, Fuentes A, Fan Q, Handschuh RF. Computerized design, simulation of meshing, and contact and stress analysis of face-milled formate generated spiral bevel gears. Mechanism Mach Theory 2002; 37(5): 441-59.
[http://dx.doi.org/10.1016/S0094-114X(01)00086-6]
[20]
Litvin FL, Fuentes A, Hayasaka K. Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears. Mechanism Mach Theory 2006; 41(1): 83-118.
[http://dx.doi.org/10.1016/j.mechmachtheory.2005.03.001]
[21]
Hong J, Yao L, Ji W, Huang Z. Kinematic modeling for the nutation drive based on screw theory. Procedia CIRP 2015; 36: 123-8.
[http://dx.doi.org/10.1016/j.procir.2015.06.103]
[22]
Cai Y, Yao L, Xie Z, Zhang J, Peng C. Influence analysis of system parameters on characteristics of the nutation drive with double circular arc spiral bevel gears. Forsch Ingwes 2017; 81(2-3): 125-33.
[http://dx.doi.org/10.1007/s10010-017-0245-x]
[23]
Fanghella P, Bruzzone L, Ellero S. Dynamic balancing of a nutating planetary bevel gear train. In: Multibody Mechatronic Systems Huatulco, Mexico 2014.
[24]
Fanghella P, Bruzzone L, Ellero S, Landò R. Kinematics, efficiency and dynamic balancing of a planetary gear train based on nutating bevel gears. Mech Based Des Struct Mach 2016; 44(1-2): 72-85.
[http://dx.doi.org/10.1080/15397734.2015.1047956]
[25]
Abu Arqub O. Adaptation of reproducing kernel algorithm for solving fuzzy Fredholm–Volterra integrodifferential equations. Neural Comput Appl 2017; 28(7): 1591-610.
[http://dx.doi.org/10.1007/s00521-015-2110-x]
[26]
Arqub OA, Al-Smadi M. Fuzzy conformable fractional differential equations: Novel extended approach and new numerical solutions. Soft Comput 2020; 24(16): 12501-22.
[http://dx.doi.org/10.1007/s00500-020-04687-0]
[27]
Wang GX, Deng J, Wang P, Zhu LL. A design method of internal tangent face gear. CN106126844, 2016.
[28]
Wang GX, Deng J, Wang P, Li LJ. Meshing principle and dynamic simulation of nutation drive with face-gear. Journal of Dalian Jiaotong University 2017; 38(2): 48-54.
[29]
Wang G, Zhu L, Wang P, Deng J. Meshing and bearing analysis of nutation drive with face gear. Recent Pat Mech Eng 2020; 13(4): 352-65.
[http://dx.doi.org/10.2174/2212797613999200420161031]
[30]
Wang GX, Zhu LL, Wang P. Analysis of tooth stiffness of nutation face gear. Eng Comput 2020; 38(4)
[http://dx.doi.org/10.1108/EC-11-2019-0522]
[31]
Buckingham E. Analytical Mechanics of Gears. New York, U.S.: Dover Publications 1949; pp. 312-20.
[32]
Handschuh RE, Lewicki DG, Heath GF. Experimental evaluation of Face-gears for aerospace drive system applications. American Society of Mechanical Engineers 1996; 18: 581-8.
[33]
Handschuh RF, Lewicki DG, Bossler RB. Experimental testing of prototype face gears for helicopter transmissions. Proc Inst Mech Eng Part G J Aerosp Eng 1994; 208(2): 129-36.
[http://dx.doi.org/10.1243/PIME_PROC_1994_208_262_02]
[34]
Litvin FL, Fuentes A, Howkins M. Design, generation and TCA of new type of asymmetric face-gear drive with modified geometry. Comput Methods Appl Mech Eng 2001; 190(43-44): 5837-65.
[http://dx.doi.org/10.1016/S0045-7825(01)00201-8]
[35]
Litvin FL, Fuentes A, Zanzi C, Pontiggia M, Handschuh RF. Face-gear drive with spur involute pinion: Geometry, generation by a worm, stress analysis. Comput Methods Appl Mech Eng 2002; 191(25-26): 2785-813.
[http://dx.doi.org/10.1016/S0045-7825(02)00215-3]
[36]
Litvin FL, Fuentes A, Zanzi C, Pontiggia M. Design, generation, and stress analysis of two versions of geometry of face-gear drives. Mechanism Mach Theory 2002; 37(10): 1179-211.
[http://dx.doi.org/10.1016/S0094-114X(02)00050-2]
[37]
Litvin FL, Gonzalez-Perez I, Fuentes A, Vecchiato D, Hansen BD, Binney D. Design, generation and stress analysis of face-gear drive with helical pinion. Comput Methods Appl Mech Eng 2005; 194(36-38): 3870-901.
[http://dx.doi.org/10.1016/j.cma.2004.09.006]
[38]
Zhao N, Wang RF, Jia QJ. Study on the load sharing of face gear split torque transmission system. Journal of Mechanical Transmission 2013; 37(12): 5-9.
[39]
Zschippang HA, Weikert S, Küçük KA, Wegener K. Face-gear drive: Geometry generation and tooth contact analysis. Mechanism Mach Theory 2019; 142: 103576.
[http://dx.doi.org/10.1016/j.mechmachtheory.2019.103576]
[40]
Saribay ZB, Bill RC. Design analysis of pericyclic mechanical transmission system. Mechanism Mach Theory 2013; 61: 102-22.
[http://dx.doi.org/10.1016/j.mechmachtheory.2012.10.007]
[41]
Wang GX, Zhu LL, Li LJ, Wang JY. Contact analysis of nutation face gear transmission in unified coordinate system. J Mech Des
[42]
Wang CB, Li LJ, Wang GX, Yu BM. Optimization design of box core frame structure for railway wagons castings. Foundry Technology 2015; 4: 1069-71.
[43]
Wang GX, Jin ZZ, Lim LJ, Zhu LL, He WJ. Machining method for tilting shaft and shaft parts by common CNC machine tools. CN201410299555, 2016.

Rights & Permissions Print Cite
Article Metrics
21
2
© 2024 Bentham Science Publishers | Privacy Policy