Generic placeholder image

Recent Patents on Mechanical Engineering

Editor-in-Chief

ISSN (Print): 2212-7976
ISSN (Online): 1874-477X

Research Article

Research on Vibration Damping of Tuned Mass Damper for Wheeled Excavator

Author(s): Xin Zhang, Fei Wang*, Zhanlong Li and Jianwei Li

Volume 15, Issue 5, 2022

Published on: 19 September, 2022

Page: [477 - 485] Pages: 9

DOI: 10.2174/2212797615666220816101151

Price: $65

Abstract

Background: When driving and working, the engine, working equipment and uneven road surface will cause severe vibrations to the wheeled excavator, which can affect efficiency and comfort. This paper discusses various patents and presents a new method of vibration reduction for excavators.

Objective: The research aims to design the excavator's counterweight as a tuned mass damper (TMD) to reduce body vibration.

Methods: The recent patents of TMD were investigated in this research. In this paper, the counterweight of the excavator is designed as a non-linear TMD system. The vibration models were established under the driving and crushing conditions, respectively. The vibration response of the vehicle body was calculated and analyzed through MATLAB/Simulink under driving and crushing conditions. Finally, the damping characteristics of the TMD system were discussed.

Results: The vibration of the car body can be reduced by TMD. The improvement rates in vertical acceleration were 8.05%, 11.85% and 11.15% for the three classes of road surfaces for the driving conditions. The improvement rates of vertical accelerations for the three powers of crushing conditions are 16.18%, 18.32% and 23.48%, respectively.

Conclusion: The vibration damping performance of the excavator was effectively improved by TMD in the main working conditions. The variation of body vertical acceleration with TMD parameters indicates the existence of optimal damping characteristics parameters for the TMD system at a fixed road surface and vehicle speed.

Keywords: Excavator, TMD, counterweight, simulation analysis, vibration damping, damping characteristics.

[1]
Leng D, Yang Y, Xu K, et al. Vibration control of offshore wind turbine under multiple hazards using single variable-stiffness tuned mass damper. Ocean Eng 2021; 236(4): 109473.
[http://dx.doi.org/10.1016/j.oceaneng.2021.109473]
[2]
Zhao B, Wu D, Lu Z. Shaking table test and numerical simulation of the vibration control performance of a tuned mass damper on a transmission tower. Struct Infrastruct Eng 2020; 17(8): 1110-24.
[http://dx.doi.org/10.1080/15732479.2020.1800755]
[3]
Wang L, Nagarajaiah S, Shi W, Zhou Y. Semi-active control of walking-induced vibrations in bridges using adaptive tuned mass damper considering human-structure-interaction. Eng Struct 2021; 244(1): 112743.
[http://dx.doi.org/10.1016/j.engstruct.2021.112743]
[4]
Kwag S, Eem S, Kwak J, Lee H, Oh J, Koo G-H. Mitigation of seismic responses of actual nuclear piping by a newly developed tuned mass damper device. Nucl Eng Technol 2021; 53(8): 2728-45.
[http://dx.doi.org/10.1016/j.net.2021.02.009]
[5]
Jiang Z. The impact of a passive tuned mass damper on offshore single-blade installation. J Wind Eng Ind Aerodyn 2018; 176(1): 65-77.
[http://dx.doi.org/10.1016/j.jweia.2018.03.008]
[6]
Kang Y, Peng L, Pan P, Xiao G, Wang H. Shaking table test and numerical analysis of a coal-fired power plant equipped with large mass ratio multiple tuned mass damper (LMTMD). J Build Eng 2021; 43(11): 102852.
[http://dx.doi.org/10.1016/j.jobe.2021.102852]
[7]
Albrecht V. Method for installing a swinging movement damper into a wind turbine, filling system and wind turbine. EP3156647 2017.
[8]
Roger B. Tuned mass dampers for damping an oscillating movement of a structure. US2018355936 2018.
[9]
Bagheri S, Rahmani-Dabbagh V. Optimum inelastic tuned mass dampers without using viscous elements for minimizing steady state vibration of base-excited systems. J Vib Control 2020; 27(17-18): 1968-78.
[http://dx.doi.org/10.1177/1077546320951329]
[10]
Kim H-S, Kang J-W. Application of semi-active TMD to tilted high-rise building structure subjected to seismic loads. Int J Steel Struct 2021; 21(5): 1671-9.
[http://dx.doi.org/10.1007/s13296-021-00528-4]
[11]
García VJ, Duque EP, Inaudi JA, Márquez CO, Mera JD, Rios AC. Pendulum tuned mass damper: Optimization and performance assessment in structures with elastoplastic behavior. Heliyon 2021; 7(6): e07221.
[http://dx.doi.org/10.1016/j.heliyon.2021.e07221] [PMID: 34189292]
[12]
Araz O, Kahya V. Design of series tuned mass dampers for seismic control of structures using simulated annealing algorithm. Arch Appl Mech 2021; 91(10): 4343-59.
[http://dx.doi.org/10.1007/s00419-021-02013-0]
[13]
Etedali S, Bijaem ZK, Mollayi N, Babaiyan V. Artificial intelligence-based prediction models for optimal design of tuned mass dampers in damped structures subjected to different excitations. Int J Struct Stab Dyn 2021; 21(9): 2150120.
[http://dx.doi.org/10.1142/S0219455421501200]
[14]
Ma W, Jin X, Yu J, Yang Y, Liu X, Shen R. Oppositely oriented series multiple tuned mass dampers and application on a parallel machine tool. Mech Syst Signal Process 2022; 163(1): 108196.
[http://dx.doi.org/10.1016/j.ymssp.2021.108196]
[15]
Jin C, Chung WC, Kwon D-S, Kim MH. Optimization of tuned mass damper for seismic control of submerged floating tunnel. Eng Struct 2021; 241: 112460.
[http://dx.doi.org/10.1016/j.engstruct.2021.112460]
[16]
Jarkko K, Kalle V. Self-tuned mass damper and system comprising the same Self-tuned mass damper. US2016123422 2016.
[17]
George N, Cyril N, Lucy L, et al. Vibration energy harvesting dampe. US2020076288 2020.
[18]
Florian PL. Modules and systems for damping excitations within fluid-filled structures. US2018288892 2018.
[19]
Jarrod M, Matthew P. Spheroidial joint for column support in a tuned mass damp-er system. US2017108034 2017.
[20]
Wang M, Qin P, Zan T, Gao X, Han B, Zhang Y. Improving optimal chatter control of slender cutting tool through more accurate tuned mass damper modeling. J Sound Vibrat 2021; 513: 116393.
[http://dx.doi.org/10.1016/j.jsv.2021.116393]
[21]
Nguyen D-C. Design of the symmetric tuned mass damper for torsional vibration control of the rotating shaft. Noise Vib Worldw 2021; 52(7-8): 212-21.
[http://dx.doi.org/10.1177/09574565211000416]
[22]
Qin P, Liu Y, Wang M, Zhang Y. Milling vibration control of semiconical shell workpiece with multiple distribution tuned mass dampers. Int J Adv Manuf Technol 2021; 115(3): 2175-90.
[http://dx.doi.org/10.1007/s00170-020-06427-y]
[23]
Stephan M. Torsional vibration damper. EP3645911 2020.
[24]
Steven E, Austin MS, Ben JS. Tuned mass-spring damper for electronics enclosure. US2019234482 2019.
[25]
Douglas W. Tuned mass damper in an exterior rearview device. US2019232872 2019.
[26]
Jeremy J. Anti-vibration suspension device for a mechanical element, and an aircraft. US2018265187 2018.
[27]
Griffin SF, Granger GD. Dynamic shape maintenance of aerospace subsystems using tuned mass dampers. US2016319895 2016.
[28]
Kim MH, Kim SY. Earthquake-resistant light tower with the tuned mass damper. US2018209141 2018.

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy